ROCKARMOR ELITE STEEL BULLBAR TO SUIT TOYOTA LANDCRUISER 200 GX GXL Sep 2015-2021 (Full Bar Replacement)
Wait and delivery times on all products.
Most items are a special buy in or made to order and are not in stock, Please ask for wait times before purchasing if your in a hurry
ROCKARMOR ELITE STEEL BULLBAR TO SUIT TOYOTA LANDCRUISER 200 GX GXL Sep 2015-2021 (Full Bar Replacement)
- PLEASE NOTE SENSOR HOLES WILL NEED TO BE MANUALLY DRILLED
- ALL MODELS FROM September 2015 Through to October 2021
FITTING VIDEO BELOW
Features:
- 63mm tube 3mm Steel
- Compatible with Headlight washer
- Twin high lift jack points
- Twin Slotted Antenna Mounts
- Winch Compatible
- Winch plate & Mounting Cradle 2 in 1 System
- LED INDICATOR & FOG LIGHT included
- Bumper Guard included
- Stone guard splash plates included
- Pre drilled Holes for driving lights
- ADR Complied (Locally tested in Adelaide Australia)
Designed & tested in Australia, Rockarmor’s Elite Series Steel Bull Bar has been engineered to provide your vehicle with maximum frontal protection. The Rockarmor bull bar is manufactured from premium grade 3mm steel and features a 63mm diameter cross tube, protecting your vehicles vital exterior components from potential animal strikes.
Designed to be functional for vehicles that drive both on road & off road, the Bull Bar has been engineered to store optional 4wd accessories, that include a Winch, UHF Antenna, safety flags and driving lights.
The Rockarmor Bull Bar is finished with a high quality powder coat that will withstand Australia’s harsh weather conditions and comes complete with L.E.D fog lights, L.E.D indicators, splash plates, bumper guards as well as provisions for high lift jack use.
Rockarmor’s full range of bull bars are Australian tested in the State of Adelaide, where they are put through a strict set of tests, making them ADR Complied & Air Bag Compatible, giving you full confidence your vehicle will be protected at all times.
INSTALLATION
Rockarmor New Zealand will not warrant their winch if the following are not followed:
- The installation of our winches is conducted by an qualified electrician
- A separate isolation switch be installed to prevent draw from the battery when not in use.
- Misuse of the winch
Rockarmor New Zealand will not warrant their spotlight if the following are not followed:
- The installation of our winches is conducted by an qualified electrician
- Misuse of the spotlight
To comply with NZTA all daytime running lights should be installed separately to your headlights. Also note that the fog lights need to be adjusted to three degrees down.
If your vehicle's suspension is not upgraded to withstand 60-100kgs, we do recommend that you upgrade the suspension, especially in the front of the vehicle to withstand the weight of the Steel Bumper & optional winch (if an electric winch is installed with the bull bar) If your vehicle's suspension is not upgraded, or if you are running factory suspension, your front suspension will sag and the ride will become bumpy which can possibly lead to further damage.
We recommend when fitting the bull bar to leave a minimum 10-15mm gap between the bullbar and body of the vehicle. This will allow for movement where the chassis & body move independently.
FITTING VIDEO
NOTICE
-All Sales are Final unless the product is defective or not fit for purpose as specified at the time of sale.
-Defective products must be notified immediately upon receiving them.
-Some products will not be a direct bolt up or fit and require professional install and some modifications/ calibration in some cases.
-You will have 7 days from the time of delivery to lodge a refund/ return or exchange request.
-Due to the ever-changing rules around LVVTA standards it is the purchaser’s responsibility to check that these products are compliant with current standards for usage on public roads.