Skip to content

ROCKARMOR ELITE STEEL BULLBAR TO SUIT NISSAN NAVARA NP300 D23 2015-2020 (Full Bar Replacement)

Original price $2,100.00 - Original price $2,100.00
Original price
$2,100.00
$2,100.00 - $2,100.00
Current price $2,100.00

Wait and delivery times on all products.

Most items are a special buy in or made to order and are not in stock, Please ask for wait times before purchasing if your in a hurry

ROCKARMOR ELITE STEEL BULLBAR TO SUIT NISSAN NAVARA NP300 D23 2015 - November 2020  (Full Bar Replacement)

FITTING VIDEO BELOW

Features:

  • 63mm cross tubing
  • LED fog lights
  • LED parked and indicator lights
  • Winch compatible
  • Airbag compatible
  • Underbody skid plate protection
  • Twin antenna & driving light mounts

Bull Bar info: 

Designed & tested in Australia, Rockarmor’s Elite steel Bullbar provides your vehicle with the ultimate in front end protection. Making sure air flow to the engine is maintained, the Rockarmor bull bar is manufactured with a heavy duty 63mm diameter cross bar which protects the full front of the vehicle against any potential animal strikes that may harm areas like your head lights, front grill and engine components.

Designed to be functional for vehicles that drive both on road & off road. The Rockarmor’s Elite bullbar is put through a strict set of tests that gives you confidence your vehicle will be protected at all times.

INSTALLATION

To comply with NZTA all daytime running lights should be installed separately to your headlights. Also note that the fog lights need to be adjusted to three degrees down.

If your vehicle's suspension is not upgraded to withstand 60-100kgs, we do recommend that you upgrade the suspension, especially in the front of the vehicle to withstand the weight of the Steel Bumper & optional winch (if an electric winch is installed with the bull bar) If your vehicle's suspension is not upgraded, or if you are running factory suspension, your front suspension will sag and the ride will become bumpy which can possibly lead to further damage. 

We recommend when fitting the bull bar to leave a minimum 10-15mm gap between the bullbar and body of the vehicle. This will allow for movement where the chassis & body move independently. 

FITTING VIDEO

NOTICE

-All Sales are Final unless the product is defective or not fit for purpose as specified at the time of sale.
-Defective products must be notified immediately upon receiving them.
-Some products will not be a direct bolt up or fit and require professional install and some modifications/ calibration in some cases.
-You will have 7 days from the time of delivery to lodge a refund/ return or exchange request.
-Due to the ever-changing rules around LVVTA standards it is the purchaser’s responsibility to check that these products are compliant with current standards for usage on public roads.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare